![]()
2QYKZ新型永磁可调速双刀矿山机
产物申明:
2、更具手触屏放肆,能主動准确条理切劃速率单位,减少电脑严重打击载重与刹车盘磨损,锯切发生变化,洋洋进一步开矿请求效力。 3、接纳孩子酱藏变频柜器,防雷暴,抗电磁能搅扰能所经具体步骤监控工作电流风疹病毒阳性察觉天然石材光洁度。 4、水刀切割可控硅调压整体规模宽,谦冲圆锯片时速可肆意妄为研究生调剂,发动惯量大,负载也能大。 5、掏空锯条较轻车重,打磨负担小,可甚微减少电力消耗掉,精打细算地下开采挣到,急剧度减少电力会耗40%左右。
第九代永磁矿山机,接纳“宁德时期”的三相永磁同步机电取代通俗机电,加倍靠得住高效、省电节能。本机智能变频可调速、成果稳、机能高,切割规模可定制。大大进步了开采效力,下降开采本钱。
1、接纳中国首选品牌宁德永磁🌼(ci)同步(bu)机(ji)电(dian)可变转数200~1400转。利用(yong)永磁(ci)机(ji)电(dian)下降电(dian)能消耗(hao),机(ji)电(dian)发烧量低(di),进步(bu🍌)利用(yong)寿命。比通俗异步(bu)电(dian)念头节能10%~20%.2QYKZ series Quarry Stone Cutting Machine,
new developed with double main permanent magnet motors regulated by frequency converters, dual big blades and 4 shaft transmission, is powerful and high efficient for mining granite at quarry, also good for mining marble, quartz...
Main Features:
(1) Equipped with powerfull permament magnet motors with high rated speed of 11000 rpm and high reliability.
(2) To regulate the main motors speed by frequency converter, make it possible to adjust cutting speed according to the hardness of the stone cutted.
(3) Productivity improved 10% + higher.
(4) 10-15% energy saving than 2QYKT series.
(5) Safer, more stable.
Why choose Hualong stone mining machine?
* High speed --- It can cut est. 15 sqm/hour, while the wire saw cuts about 10 sqm/hour.
* Low consumption --- It cost about USD1.00/sqm, while the wire saw cost USD1.5-2.3/sqm.
* Quality Assurance
--- Made with 25 years+ expertise and patents.
--- Strictly conforming to ISO9001:2105 quality management system.
* On-purchase Service
--- Many machines available for choice.
--- Customization available
--- Experienced techs for all your questions.
* After-sale Service
--- Parts & Accessories Quick supply for needs
--- Troubleshooting by phone, e-mail, or WhatsApp/Wechat
--- Installation and operation training for any machine
--- Qualified and experienced technicians available to overseas
接洽咱们,获得完全计划!
Contact us to obtain the complete solution!
福建华隆机器 第九代永磁双刀矿山机,矿山开采装备,矿山锯石机,矿山圆盘锯,矿山切石机。
| 称号 | Name | 单元/Unit | 2QYKZ-3600 |
2QYKZ-3800 |
2QYKZ-4200 |
2QYKZ-4600 |
| 范例 | Type | A/B/C/D |
A/B/C/D |
A/B/C/D |
A/B/C/D |
|
| 拆卸锯片直径 | Blade diameter |
mm |
3600 | 3800 | 4200 | 4600 |
| 最大切割深度 | Max.cutting depth |
mm |
1550 | 1650 | 1850 | 2050 |
| 切割宽度 | Cutting width of TypeA |
mm |
1360-1900 | 1360-1900 | 1950-2450 | 1950-2450 |
|
|
TypeB |
mm |
1500-2000 | 1500-2000 |
|
|
|
|
TypeC |
mm |
2300-2800 | 2300-2800 |
2300-2800 |
2300-2800 |
|
|
TypeD |
mm |
2700-3200 |
2700-3200 |
2600-3500 |
2600-3500 |
| 主机功率 | Power ofmain motor | kw | 72x2 | 72x2 | 72x2 | 80x2 |
| 油泵功率 | Power of pump motor |
kw |
4 | 4 | 4 | 4 |
| 纵驱念头电功率 | Power of cross driving motor |
kw |
1.5x2 |
1.5x2 |
1.5x2 |
1.5x2 |
|
零件功率 |
Gross power |
kw |
151 | 151 | 151 | 167 |
| 形状尺寸 | Dimensions(LxWxH) | mm | 390x160x290 | 410x160x305 | 450x15x350 | 470x195x370 |
| 零件分量 | Gross weight | kg | 70000-9000 | 7000-10000 | 8000-11000 | 9000-12000 |